Marantz SD555 - Page 4

(3)
(4)
(1)
(2)
(3)
(4)
How to Remove the Back pane!
Remove the top cover (35) and front Panel. Ass‘y. (Refer to
section 1.)
Remove the screw (3X8CBTS(P)-B) (103) that is holding the
4P pin jack.
Remove the busing (6) (7) that is fixing power supply cord
from back panel (48).
Remove the three hooks on the bottom of back panel (48)
and pull the unit back to detach it.
How to Remove the Audio P.W. Board
Remove the top cover (35) and the front esc. Ass’y. (Refer to
section 1.)
Remove the screw (3X8CBTS(P)-B) (103) that is holding the 4P
pin jack.
Remove the connectors from the audio P.W. board and power
P.W. board.
power P.W. board CW191 — CN191 audio P.W. board
Remove the five screws (3X8CBTS(P)-B) (103), (3X8CBTS({S)-B)
(102) the audio P.W. board can be removed by rising it.
How to Remove the Power Supply P.W. board
Remove the top cover (35). (Refer to section 1.)
Remove the busing (6) {7} that is fixing power supply cord from
rear panel (48).
Remove the connectors from the audio P.W. board and power
P.W. board.
power P.W, board CW191 — CN191 Audio P.W. board
Remove the seven screws (4X10CBST(P)-Z) (104), (3X8CBST(P)-B)
(103) that are holding the power transformer and P.W. board. The
power supply PW. board can be removed by rising it.
\ PCS 87 610
eee iiss yatilanageaeugent.
vera pie
i
!
A
j
RROD iti hea ia Ra AAI en tn ect