EasyManua.ls Logo

Marantz SM-17SA - User Manual

Marantz SM-17SA
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENGLISH
FRANCAIS
ITALINO
SVENSKA
DANSK
ESPANOL
DEUTSCH
NEDERLANDS
PORTUGUES
ENGLISH
FRANCÇAIS
ITALINO
SVENSKA
DANSK
NEDERLANDS
PORTUGUÊS
ESPAÑOL
DEUTSCH
9
TECHNICAL SPECIFICATIONS (DIN)
Rated power output (20 Hz to 20 kHz 2 CH simultaneous drive) ......................................................................................60W x 2 (8 load)
80W x 2 (6 load)
100W x 2 (4 load)
(20 Hz to 20 kHz BTL drive) ............................................................................................................200W x 1 (8 load)
Total harmonic distortion (20 Hz to 20 kHz 2 CH drive, 8 load ......................................................................................................... 0.01 %
Cross-modulation distortion (SMPTE) ................................................................................................................................................... 0.01 %
Output bandwidth (8 load 0.04 %) ...................................................................................................................................... 10 Hz to 50 kHz
Frequency response ........................................................................................................................................... 5 Hz to 100 kHz + 0 , -1 dB
Damping factor (8 load, 20Hz to 20kHz) ................................................................................................................................................ 100
Input sensitivity/input impedance.................................................................................................................................................... 1.6 V/22 k
S/N (IHF network, input shorted) ............................................................................................................................................................. 112dB
Supply voltage........................................................................................................................................................................ 120 V AC, 60 Hz
Power consumption ................................................................................................................................................................................ 180 W
Dimensions
Width .............................................................................................................................................................................................. 458 mm
Height ............................................................................................................................................................................................. 110 mm
Depth............................................................................................................................................................................................... 407mm
Weight .................................................................................................................................................................................................. 15.5 kg
Design and specifications are subject to change without notice.
Question and Answer IconNeed help?

Do you have a question about the Marantz SM-17SA and is the answer not in the manual?

Summary

PRECAUTIONS

GENERAL PRECAUTIONS

Precautions for operating the equipment, covering ventilation, placement, and environmental factors.

SM-17 SA Product Description

Details about the SM-17SA power amplifier, its stereo/monaural capabilities, and bi-amp compatibility.

NAMES OF CONTROLS AND INDICATORS

ATT switch

Attenuator switch that reduces amplifier gain by 6dB for stereo operation.

INPUT jack

Left/right signal input jacks; serves as BTL line amp input during monaural operation.

BTL switch

Determines operation mode: NORMAL for stereo, BTL for monaural power amplification.

BTL OUTPUT jack

Output jacks for BTL operation, providing in-phase and inverted signals for connection.

SPEAKER OUTPUT terminal

Terminals for connecting speaker systems, including specific polarity for BTL connection.

AC IN jack

Connects the unit to an AC power outlet; supports 120 V AC operation only.

AC OUTLETS

Provides switched and unswitched AC outlets for powering other components.

POWER switch

Turns the unit ON or OFF. The meter lamp illuminates when the unit is powered ON.

Warm-up meter

Indicates the unit's warm-up status, showing when optimal sound performance is achieved.

Summary

PRECAUTIONS

GENERAL PRECAUTIONS

Precautions for operating the equipment, covering ventilation, placement, and environmental factors.

SM-17 SA Product Description

Details about the SM-17SA power amplifier, its stereo/monaural capabilities, and bi-amp compatibility.

NAMES OF CONTROLS AND INDICATORS

ATT switch

Attenuator switch that reduces amplifier gain by 6dB for stereo operation.

INPUT jack

Left/right signal input jacks; serves as BTL line amp input during monaural operation.

BTL switch

Determines operation mode: NORMAL for stereo, BTL for monaural power amplification.

BTL OUTPUT jack

Output jacks for BTL operation, providing in-phase and inverted signals for connection.

SPEAKER OUTPUT terminal

Terminals for connecting speaker systems, including specific polarity for BTL connection.

AC IN jack

Connects the unit to an AC power outlet; supports 120 V AC operation only.

AC OUTLETS

Provides switched and unswitched AC outlets for powering other components.

POWER switch

Turns the unit ON or OFF. The meter lamp illuminates when the unit is powered ON.

Warm-up meter

Indicates the unit's warm-up status, showing when optimal sound performance is achieved.

Marantz SM-17SA Specifications

General IconGeneral
BrandMarantz
ModelSM-17SA
CategoryAmplifier
LanguageEnglish

Related product manuals