Marantz SR1010 User Manual

@ Display
This panel shows information on'the status of the unit.
TIMER]
Timer indicator
COP D-T: Tape copy indicator
SLEEP}. SLEEP indicator
Preset SCAN indicator
: Tuned indicator
STEREO indicator
H FM AUTO/AUTO memory indicator
: Memory indicator
“I~: Function/Station name/Clock indicator
Frequency/Preset indicator
SGOosSesg@GO8o
:
VOLume control
This knob adjusts the volume.
@ BALance control
This rotary dial adjusts the balance between the left and right
speakers and headphones.
@ PHONES jack
For connecting a pair of stereo headphones.
Plugging in the headphones turns the speaker sound off.
@)_ MEMO button
This button is used to store frequency preset, timer setting
data, preset station name and clock data in the memory.
@ copy button
Press to copy sound from DCC to TAPE. The sound can be
copied regardless of the source being played.
NOTE:
This button is invalid wnen a component of the Marantz Slim
Line Series is connected through the AL-Bus.
@ Infrared sensor
The infrared signal from the remote control enters the unit
through this window. When remote controlling the unit, point
the remote contro! transmitter toward this window.
cz} BASS/TREBLE tone controls
The bass and treble frequencies can be controlled by turning
the respective controls. Turning a control clockwise toward +
enhances the corresponding frequencies and turning it
counterclockwise toward — attenuates them.
BASS: Controls the tone of low frequencies.
TREBLE: Controls the tone of high frequencies.
CONTROL BUTTONS ON THE REMOTE
CONTROL
POWER switch
Press thé switch to turn the power of the unit ON. Pressing
the switch again turns the power OFF and the unit enters the
standby mode.
This switch also turns the power output from the AC OUTLET
on the rear panel ON/OFF.
2} Function buttons
CD, PHONO, FM/AM (iuner), DCC, TAPE, AUX 4/TV and
AUX 2/LD.
These buttons select the source to be played or recorded.
3) Numeric buttons 1 to 9
These buttons are used fo enter figures in the selection of a
tuner preset station, to set the clock or to set select a CD
track number, etc. The functions of these buttons are
dependent on the function button selected.
4) O/CL button
This button is used to enter the number “O” as well as to
cance! various operations.
5) Control buttons
Play (>), Stop (a), Pause (H), FF (me), REW (<4).
These buttons are used when operating the CD player, TAPE
deck, DCC deck, etc.
The functions of these buttons are dependent on the function
button selected.
6] MODE 1/A button
The function of this button is dependent on the function
button selected, as described below.
When CD is selected:
Disc + (used to select a disc in the CD changer).
When TAPE or DCC is selected:
Deck A
(used to select deck A of a double cassette deck).
When TUNER is selected:
FIP
(used to select whether frequencies or preset numbers.
are to be displayed).
When AUX 1/TV is selected:
Video
(used to switch the TV input between VIDEO and TV).
When AUX 2/LD is selected:
Side A (used to select side A of LD).
When a VCR is selected:
Auto Tracking (used to select auto tracking of VCR).
7) MODE 2/B button
The function of this button is dependent on the function
button selected, as described below.
When CD is selected:
Disc — (used to select a disc in the CD changer).
When TAPE or DCC is selected:
Deck B
(used to select deck B of a double cassette deck).
When TUNER is selected:
Preset Scan (used to receive all of the tuner preset
stations sequentially).
When AUX 1/TV is selected:
PIP (used to select the Picture-In-Picture Function).
When AUX 2/LD is selected:
Side B (used to select side B of LD).
The foliowing table shows the functions of the MODE buttons
Band.
CD |TAPE/DCC | TUNER | . TV LO VCR
[BIMODE-1/A |DISC + | DECKA | F/P/CH |VIDEO|SIDE A| AUTO-Tr:
DISC -| DECKB |P.SCAN| PIP |SIDEB CNTICLK |

Marantz SR1010 Specifications

General

Brand	Marantz
Model	SR1010
Category	Amplifier
Language	English