Marantz SR7500 User Manual

Partner: Marantz
Model: SR8500 + SR7500
Device Type: Surround Receiver
GENERAL INFORMATION
SIMPLWINDOWS NAME:
Marantz SR8500 + SR7500
CATEGORY:
Receiver/Processor
VERSION:
V1.0
SUMMARY:
This module controls and provides true feedback for the Marantz SR8500 & SR7500.
GENERAL NOTES:
This module provides control for both zones on the SR8500 & SR7500. It also
provides true feedback.
NOTE: IN THE PREFERENCES MENU, YOU MUST SET THE STBY MODE TO NORMAL.
IF YOU DO NOT CHANGE THIS SETTING, YOU WILL NOT BE ABLE TO TURN THE
RECEIVER ON VIA RS232.
NOTE: THIS MODULE IS FOR 2 SERIES PROCESSORS ONLY.
CRESTRON HARDWARE REQUIRED:
C2COM, ST-COM
SETUP OF CRESTRON HARDWARE:
RS232
Baud: 9600
Parity: None
Data Bits: 8
Stop Bits: 1
VENDOR FIRMWARE:
None
VENDOR SETUP:
IN THE PREFERENCES MENU, YOU MUST SET THE STBY MODE TO NORMAL. IF YOU
DO NOT CHANGE THIS SETTING, YOU WILL NOT BE ABLE TO TURN THE RECEIVER
ON VIA RS232.
CABLE DIAGRAM:
CNSP-123

Marantz SR7500 Specifications

General

Number of Channels	7.1
Component Video Inputs	3
THD	0.05%
Input Sensitivity	200 mV
Signal to Noise Ratio	105 dB
Frequency Response	10Hz - 100kHz (+1, -3 dB)
Video Switching Bandwidth	100 MHz
Digital inputs	5 (2 Optical, 3 Coaxial)
Analog Inputs	8
AM/FM Tuner	Yes
HDMI Inputs	0
Dolby Decoding	Dolby Digital EX, Dolby Pro Logic IIx
DTS Decoding	DTS, DTS-ES, DTS Neo:6
Digital Audio Inputs	3 optical, 2 coaxial
Dimensions	440 x 171 x 423 mm
Weight	33.1 lbs
Video Inputs	3 Component
Outputs	Composite Video, S-Video, Component Video
Surround Sound Formats	Dolby Digital, Dolby Pro Logic IIx, DTS, DTS-ES, DTS Neo:6