Marantz SR7500 - Tuner Preset Scan and Memory; Multi-Room Power and Input Control; Multi-Room Volume, Mute, and Sleep Timer; Multi-Room Tuner and Speaker Control

Partner: Marantz
Model: SR8500 + SR7500
Device Type: Surround Receiver
tuner_preset_scan_start/stop D Pulse to start and stop the tuner preset scan function.
tuner_key*
D
Pulse to enter either the tuner frequency or tuner preset number. You must pulse
the tuner_freq_num_direct_set input or the tuner_preset_num_call input.
tuner_preset_num_call D Pulse to select the preset number entered using the tuner_key* inputs.
tuner_freq_num_direct_set D Pulse to select the tuner frequency entered using the tuner_key* inputs.
direct_tuner_key*
D
Pulse to enter the preset number after pulsing the tuner_memory input or to recall
the preset number directly.
tuner_memory D Pulse to enter preset number before direct_tuner_key* pulse.
tuner_clear D Pulse to clear memory after tuner_memory pulse.
tuner_rds_disp(only_EU_Ver.) D Pulse to turn the rds on and off. Only available on European models.
tuner_rds_pty(only_EU_Ver.) D Pulse to turn the rds pty function on and off. Only available on European models.
mr_power_on/off_toggle D Pulse to turn the mutli-room power on and off.
mr_input_* D Pulse to select the multi-room input.
mr_volume_up/down D Press and hold to adjust the multi-room volume.
mr_audio_mute_on/off/toggle D Pulse to turn the multi-room volume mute on and off.
mr_osd_on/off D Pulse to turn the multi-room on screen display on and off.
mr_sleep_timer_off D Pulse to turn the multi-room sleep timer off.
mr_sleep_timer_*min D Pulse to set the multi-room sleep timer for the desired number of minutes.
mr_sleep_set_toggle D Pulse to cycle the sleep timer.
mr_tuner_mode_auto_stereo/mono/toggle D Pulse to set the multi-room FM tuner to auto stereo or mono.
mr_tuner_freq_up/down D Press and hold to adjust the multi-room tuner.
mr_tuner_auto_* D Pulse to start and stop the tuner auto tune function.
mr_tuner_preset_up/down D Pulse to step to the next or previous preset.