Marantz SR8012OM - Page 265

Delete saved remote control codes
Codes can be erased in three ways: by buttons, sources, and by all
memory contents.
o
Delete remote control codes for each button
1
Press and hold SET until the LEARN indicator blinks.
2
Press input source select buttons to select the input
source you want to delete.
The input source is shown in the remote control display.
3
Press and hold POWER X and press the learned button
to be erased twice.
“ERASE” is shown in the remote control display.
4
Press SET.
0
The LEARN indicator turn off.
o
Delete remote control codes for each input
source
1
Press and hold SET until the LEARN indicator blinks.
2
Press and hold POWER X and press the learned input
source select buttons to be erased twice.
“ERASE” is shown in the remote control display.
3
Press SET.
0
The LEARN indicator turn off.
o
Delete remote control codes for all input
sources
1
Press and hold SET until the LEARN indicator blinks.
2
Press and hold POWER X and press AVR twice.
“ERASE” is shown in the remote control display.
3
Press SET.
0
The LEARN indicator turn off.
Contents Connections Playback Settings Tips Appendix
265
Front panel Display Rear panel Remote Index