Marantz SR8012OM - Page 30

Remote control unit
A
Display
A
LEARN indicator
This is lit when setting the learning function for the remote control unit.
(v p. 263)
B
Information display
0
This displays “AVR” when operating this unit.
0
This displays the input source name when operating an external
device.
0
This displays “TV” when operating TV.
C
l indicator
This is lit when signals are sent from the remote control unit.
B
AVR operation button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
C
SET button
This is used for various settings on the remote control unit.
0
“Operating external devices with the remote control unit” (v
p. 254)
0
“Operating learning function” (v
p. 263)
0
“Setting the back light” (v p. 266)
0
“Specifying the zone used with the remote control unit” (v p. 267)
D
ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit.
0
“Playback in ZONE2/ZONE3” (v
p. 162)
0
“Menu operations” (v
p. 168)
q
e
w
r
qw e
Contents
Connections Playback Settings Tips Appendix
30
Front panel Display Rear panel Remote Index