MAR45W/MAR45BLS
Reverse the door swing
Tools required: Philips srewdriver, Flat head srewdrivers, wrench.
• Ensure the unit is unplugged and empty
• To take the door off, tilt the unit backwards and rest the unit on something solid so that it will not slip during the
door reversing process.
• All parts removed must be saved to do re-installation of the door.
• After completing the door reversal allow the unit to stand for 4 hours, this will allow the coolant system to settle.
• It is best if 2 people assist in changing the door swing.
3.
Remove the hole cover with a flat screwdriver
1.Carefully remove the top hinge cover with a
Flat screwdriver
4.Move the ''plug'' cover from the left side to the
right side then lift the upper door and place it on a
padded surface to prevent it from scratching.
2.Unscrew the top hinge with a Philips
screwdriver.
3
To Next Page
Loading...
