www.puretecfitness.com
COMPUTER INSTRUCTIONS
FUNCTION BUTTONS:
MODE - Push down for selecting functions.
SET - To set the values of time、count and calories when not in scan mode.
RESET - Push down for resetting time、count and calories.
FUNCTION:
SCAN Automatically scan functions of time、count、total count and calories each display will be
hold 6 seconds.
TIME Automatically accumulates workout time when exercising.
COUNT Automatically accumulates the number of Steps when exercising.
CALORIES Automatically accumulates calories burnt when exercising.
TOTAL COUNT Automatically accumulates the Total number of steps performed for different exercise
sessions.
NOTE
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes.
3. The monitor will be auto powered on when starting to exercise push button signal in.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating
when you stop exercising for 4 seconds.
SPECIFICATIONS:
FUNCTION
AUTO SCAN
Every 6 seconds
TIME 00:00’~99:59’
COUNT
0~9999TIMES
TOTAL COUNT 0~9999TIMES
CALORIES 0.1~999.9CAL
BATTERY TYPE 2pcs of SIZE –AA or UM –3
OPERATING TEMPERATURE 0°C ~ +40°C
STORAGE TEMPERATURE -10°C ~ +60°C
To Next Page
Loading...
