MARIN Rift Zon - Default Chapter; Table of Contents

2011 Marin Rift Zone & Mount Vision Service Manual
2011 Marin Rift Zone & Mount Vision Service Manual2011 Marin Rift Zone & Mount Vision Service Manual
2011 Marin Rift Zone & Mount Vision Service Manual
Page 22
Table of Contents
1.0 Introduction
2.0 Marin Geometry:
2.1 Rift Zone
2.2 Mount Vision
3.0 Preparations for riding:
3.1 Making adjustments
3.2 Set up of Fork
3.3 Set up of Rear Shock
4.0 Safety.
5.0 Lubrication:
6.0 Servicing the Rear Suspension:
6.1 Removing the Rear Shock and Swinging Arm
6.2 Stripping and Re-assembling Upper and Lower Quad-Links
6.2.1 Extraction of KP5AX flanged or KP6AX Bearings
6.2.2 Insertion of KP5AX flanged or KP6AX Bearings
6.2.3 Re-Assembly of Quad-Links
6.3 Re-assembling the Rear Suspension
7.0 Servicing The Marin Mount Vision Rear Dropout System
7.1: Removing the Rear Dropouts from the Swinging Arm.
7.2: Assembling the Rear Dropouts onto the Swinging Arm
8.0 Tightening Torque Settings.
9.0 Notes