To Next PageTo Next Page
Need help?Do you have a question about the marinco Charge Pro 27104 and is the answer not in the manual?
Warning against charging systems other than 6 or 12 Volt DC lead acid, AGM or Gel cell batteries to avoid explosion and injury.
Key safety directives including avoiding rain, using approved accessories, and handling cords properly to prevent shock or fire.
Essential personal safety measures, including eye protection, avoiding sparks, and removing metal items near batteries.
Specifies charging only lead-acid batteries and warns against charging dry-cell or frozen batteries, which can cause injury or explosion.
Steps for preparing the battery, including terminal cleaning, adding distilled water, and setting the correct voltage.
Precautions for connecting DC output clips, including avoiding touching clips and proper attachment to battery and chassis.
Safety steps when charging a battery installed in a vehicle, focusing on cord positioning to avoid damage from moving parts.
Step-by-step guide for charging lead-acid batteries, including voltage/chemistry selection, connection, and disconnection.
Solutions for common problems like no LEDs illuminating, inability to change mode, or the error LED being on.
General| Input Voltage | 120V AC |
|---|---|
| Output Current | 10A |
| Number of Banks | 1 |
| Compatibility | 12V Lead-Acid Batteries |
| Output Voltage | 12V |
| Battery Type | AGM, Gel |
| Charging Modes | Automatic |
| Protection Features | Reverse Polarity |
