marinco CHARGE PRO 28106 User Manual

CHARGE PRO
®
BATTERY CHARGERS
INSTRUCTION MANUAL
(PART #'S: 28106, 28210)
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions for the chargers.
Read the entire manual before using. Also read all instructions and cautions for and
on the charger, batteries and equipment in the vicinity of the batteries.
INTRODUCING THE CHARGERS
The Marinco chargers are designed to both recharge your batteries, and extend
your battery’s life in applications where it is stored for long periods of time. They
are multi-stage, completely automatic, lightweight, silent, battery chargers and each
output produces 12 Volts DC at either a full 5 or 6 Amps (model specic), while using
much less AC current than other charger types. When the charger is attached to your
batteries and plugged into a standard 115 Volt / 60 Hz AC outlet, the red and green
LED’s let you know the unit is recharging and maintaining your batteries. Model 28210
uses Sense-Send Technology to quickly charge two batteries and will automatically
start charging when the battery voltage becomes low.
IP68RoHS
BC
53AB
Models Amperage No. Of Banks Volts
28106 6 Amps 1 Banks 12
28210 5/5 Amps 2 Banks 12/24

marinco CHARGE PRO 28106 Specifications

General

Input Voltage	120V AC
Battery Type	Lead-acid, AGM, Gel
Number of Banks	1
Charging Stages	3
Compatibility	12V batteries
Output Voltage	12V
Protection Features	Overcharge, Short Circuit, Reverse Polarity
Output Current	10A

Summary

Safety Instructions and Precautions

General Safety Instructions

Important safety guidelines for charger operation, including handling attachments, cords, and electrical safety.

Personal Safety Precautions

Safety measures for individuals working near batteries, emphasizing personal protection and acid exposure precautions.

Preparing to Charge

Pre-Charge Precautions

Essential checks before charging, such as inspecting cables, accessories, ventilation, and battery terminals.

Installation

AC Connection and Grounding

Charging Location and Mounting

Operation

DC Connection Procedures

Advanced Features

Specifications

Technical Specifications

Connection Diagrams

Wiring Diagrams

Troubleshooting

Troubleshooting Guide

Solutions for common operational problems identified by LED indicators or performance issues.