marinco CHARGE PRO 28210

To Next Page

CHARGE PRO

BATTERY CHARGERS

INSTRUCTION MANUAL

(PART #'S: 28106, 28210)

SAVE THESE INSTRUCTIONS

This manual contains important safety and operating instructions for the chargers.

Read the entire manual before using. Also read all instructions and cautions for and

on the charger, batteries and equipment in the vicinity of the batteries.

INTRODUCING THE CHARGERS

The Marinco chargers are designed to both recharge your batteries, and extend

your battery’s life in applications where it is stored for long periods of time. They

are multi-stage, completely automatic, lightweight, silent, battery chargers and each

output produces 12 Volts DC at either a full 5 or 6 Amps (model specic), while using

much less AC current than other charger types. When the charger is attached to your

batteries and plugged into a standard 115 Volt / 60 Hz AC outlet, the red and green

LED’s let you know the unit is recharging and maintaining your batteries. Model 28210

uses Sense-Send Technology to quickly charge two batteries and will automatically

start charging when the battery voltage becomes low.

IP68RoHS

53AB

Models Amperage No. Of Banks Volts

28106 6 Amps 1 Banks 12

28210 5/5 Amps 2 Banks 12/24

Need help?

Do you have a question about the marinco CHARGE PRO 28210 and is the answer not in the manual?

Summary

Save These Instructions

Introducing the Chargers

Details the Marinco chargers' design for recharging and extending battery life using multi-stage, automatic charging.

Important Safety Instructions

Extension Cord Usage

Guidelines for using extension cords, including proper wiring, condition, and wire size for charger compatibility.

Personal Safety Precautions

Battery Acid Safety

Precautions for handling battery acid, including immediate washing and eye flushing with cold water.

Preparing to Charge Precautions

Essential checks before charging, such as cable condition, accessory status, ventilation, and terminal cleaning.

AC Connection and Grounding Precautions

Choosing Charging Location

Optimal placement for cooling, ventilation, and mounting position to prevent overheating and performance reduction.

Mounting the Charger

Instructions for securely mounting the charger unit using appropriate hardware and tools.

DC Connection Precautions

Operating the Charger: Charge Cycle

Details the multi-stage charging process: Soft Start, Bulk, Absorption, Float, and Maintenance stages.

LED Indicators

Explanation of LED lights (Red, Green) and their meaning during different charging stages.

Sense-Send Technology

Maintaining the Charger

Guidance on periodic cleaning of battery terminals and tightening connections for charger upkeep.

FCC Class B EMC Notice

Information regarding compliance with FCC rules for digital devices and potential radio frequency interference.

Specifications

Connection Diagrams

Illustrations showing how to connect the charger to 12V and 24V battery systems.

Troubleshooting

Limited Warranty