Troubleshooting:
If you should encounter an issue with your TrollMaster use these tips to
determine the best course of action to resolve the issue.
Problem: The unit powers on and the display functions properly, your
buttons show function on the screen and the numbers increase when turning
the speed adjustment knob but there is no response from the servo motor.
Solution: Verify the servo motor is plugged in accordingly with the brown
wire aligned with the white mark on the control cable plug and test again. If
there is still no response, replace the servo motor with a new one and test
again. If after replacing the servo motor and testing again there is still no
response contact MarineTech Products Inc. 866-228-7655 to have the unit
inspected at our facility.
Problem: The unit powers on works momentarily then powers off. The unit
will not stay powered on.
Solution: Check your battery voltage; if the battery voltage is low the unit
will not operate properly. When in doubt charge your battery to ensure there
is enough voltage to operate the TrollMaster unit to its fullest potential. If
the battery is fully charged and the unit is still not operating properly contact
MarineTech Products, Inc. 866-228-7655 to have the unit inspected at our
facility.
If you need assistance with Troubleshooting contact MarineTech
Products, Inc. For tech support. Call 866-228-7655
To Next Page
Loading...
Need help?
General
