25
The monitor digital output is controlled by the source selection
buttons on the front panel, and tracks whatever source is being
listened to from the Nº30.6. It can be used as a “pass-through” for
the selected, monitored digital source, and employs the aes/ebu
transmission standard.
The
rec digital output is controlled by the digital record select
button (in conjunction with the source selection buttons), and is
unaffected by the normal selection of sources to be monitored. It
also employs the
aes/ebu transmission standard.
12 optical digital output
This output provides a digital audio signal (DAS), via a cable
equipped with EIAJ-type optical connectors, to a digital processor,
digital audio tape recorder, preamplifier, integrated amplifier, or
receiver equipped with optical digital inputs.
This rec digital output is controlled by the digital record select
button, and is unaffected by the monitor source selection but-
tons.
Caution! When using a digital recorder (like a DAT) that also
allows recording of analog signals, a specific
combination of interconnections and settings on the
digital recorder, the Nº30.6, and an associated
preamplifier may create a “feedback loop” that may
damage your system’s loudspeakers. For guidance in
avoiding such a feedback loop, consult your Mark
Levinson dealer.
To Next Page
Loading...