14
1 Press and hold the mode button on the front panel
After a few seconds, the display will change to show SET NAME and the
current name of the selected input. When you let go, it will show
NAME and the current name of the input. (Ignore this for now. You’ll
learn how to rename your inputs to match your sources later on in this
manual.)
2 press the polarity button so the display shows “HDCD MAN.”
Repeatedly pressing the polarity button will toggle the display be-
tween “
HDCD AUTO” (meaning that the Nº360S automatically lowers its
volume on conventionally-mastered discs) and “HDCD MAN.” (meaning
that gain-matching is turned off; HDCD-encoded discs will still be de-
coded properly). If you try to change from one to the other while a
Nº380 is Linked, the Nº360S will display “HDCD No38” (indicating that
the equipment already knows what to do).
Using manual gain-matching ensures that the HDCD digital filter al-
ways operates at its maximum resolution, although you may now have
to manually turn up the volume on some HDCD recordings, beyond
your usual settings.
To Next Page
Loading...