Need help?Do you have a question about the MarkBass MB Octaver and is the answer not in the manual?
General| Brand | MarkBass |
|---|---|
| Model | MB Octaver |
| Category | Music Pedal |
| Language | English |
Read, keep, heed, and follow all instructions. Avoid water, use dry cleaning, install per manufacturer guidelines, and keep away from heat sources.
Adjusts the volume level of your signal pitched one octave down.
Adjusts the volume level of your signal pitched two octaves down.
Controls the volume level of your dry sound.
Turns the effect on and off; the LED indicator illuminates when the effect is on.
When the pedal is off, your signal goes directly from input to output jack with no audio quality degradation.
Connects to your instrument. Ensure amplifier is off and volume is down before making connections.
Connects to your amplifier. Ensure amplifier is off and volume is down before making connections.
External power supply connection (9-12V DC PSU).
Access the compartment on the bottom side of the pedal using a Phillips screwdriver.
International warranty terms vary by country; register product online and retain proof of purchase for service.
Warranty does not cover damage from misuse, accident, alteration, unauthorized repairs, or normal wear and tear.
Input impedance is 1.5 Mohm / 6 Vpp, and output impedance is 100 ohm / 6 Vpp.
Dry, Oct 1, and Oct 2 levels range from -∞ to 0 dB.
Requires +9/+12V DC or a standard 9-volt battery.
Dimensions are 81.8 x 54.8 x 124.5 mm (6.7" x 5.7" x 2.4"); weight is 350 g (0.77 lbs).
Illustrates the signal path, showing how Dry, Octave 1, and Octave 2 signals are mixed.
To Next Page
