9
6.2 Top fixture cover
6.2.1
Guide the inner side cheek of the ceiling
fixture around the awning casing with a 90° turn.
6.2.2
Push outer and inner fixture cheek together.
6.2.3.
Screw ceiling fixture cover to the bracket
with socket head cap screw (SW 5).
7. Awnings with Rolltex Bearing (size-dependent)
Despite the factory setting, with local pitch angle
adjustment a correction may be necessary. The
Rolltex bearing has two setting options for an
optimal travel of the cover:
1. Greatest tension of the transport band with a
small front awning profile. By evenly turning the
two SW 3 set screws (1) clockwise, the transport
band is tensioned, relieved by turning evenly anti-
clockwise.
2. With larger awning widths, it is recommended to
set the transport belt more loosely.
To Next Page
Loading...
