EasyManua.ls Logo

Markilux 710 - Page 8

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
markilux.com
3. Awning with motor drive
Extend the awning by pressing the push-button switch for
extension/retraction. With radio-controlled operation, your
markilux specialist must exactly explain the functions on the
radio remote control to you, since, depending on the
equipment, he can set these for you individually.
Here observe the separate operating instructions of the motor
and, if available, the controller manufacturer.
The final stop for awning extension/retraction is limited. The
end stop for the extension direction will be set by your specialist
dealer.
mar kilu x
DOWN button
STOP button
Channel selection button
Down button
PROG button
(on the reverse of the
handset)
With markilux hand-held remote control (optional):
Attention: Awnings with winding handle have a
transmission end stop to limit the extension travel. It prevents
incorrect coiling of the cover onto the roller. The transmission
end stop must never be approached with force. Shortly before
reaching the end position in the extending direction, the crank
operation should be slowed in a controlled manner in order to
avoid a forced overtravel of the transmission brake. If the
transmission end stop is defective, a coiling of the cover from
below onto the roller during retracting can lead to damage to
the awning cover and the awning frame.
2.2 Awnings with interior operation (markilux 710 / 810, 720 / 820, 730 / 830, 740 / 840, 750 / 850)
90°
90°
1
2
3
1. Remove the crank rod from its magnetic holder (1) and turn
the lower crank sections (3) at the joints in such a way that
they form a 90° angle to each other.
2. Operation is carried out in accordance with points 2.-3. of
chapter 2.1 "Standard manual operation - outside
operation".
3. Aer retraction and extension respectively, straighten the
joints of the crank rod in such a way that the rotary handles
are arranged concentrically to each other. Aerwards always
secure the crank rod against uncontrolled movements in
the magnetic holder.
2.3 Direction of rotation during retraction
Tipp: If the awning does not extend in a uniform manner, retract it and extend it again. If this problem arises again, fully retract
the awning and inform your markilux specialist dealer.
1 Magnetic holder
2 Crank rod
3 Turning handle

Related product manuals