EasyManua.ls Logo

Markilux 740 - Table of Contents; Who Is Allowed to Fit Markilux Awnings; Important Information; Before Beginning with the Installation, It Is to be Checked

Markilux 740
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xxx
markilux Awnings
Important Information
1
03/04/09
Contents:
1. Who is allowed to fit markilux Awnings?
2. Before beginning with the installation, it is to be checked,...
3. Reading and passing on the instructions
4. Working at greater heights
5. Wind Resistance Class
6. Partly assembled awnings
7. Partly assembled awnings
8. Uncontrolled Operation
9. Proper intended use
10. Crush and Shear Zones
1. Who is allowed to fit markilux Awnings?
The markilux fitting instructions are intended for qualified fitters, who have experienced knowledge in the following
fields:
Work safety, operating safety and regulations for the prevention of accidents
Handling ladders and scaffolding
Handling and transport of long, heavy components
Handling tools and machines
Attaching fastening materials
Assessment of the construction material
Commissioning and operation of the product
If one of these qualifications is lacking, a specialist installation firm must be commissioned.
Electrical work: Electrical installations must be carried by a qualified electrician according to VDE 0100. The
installation instructions enclosed with the electrical devices supplied are to be observed.
It is recommended that fitting is performed with at least two persons, for larger awnings with three.
2. Before beginning with the installation, it is to be checked,...
... whether the fitting fixtures supplied correspond in type and number with the order ,
... whether the specifications made with the order concerning the fastening background correspond with the actual
fastening background at hand (only for folding-arm awnings).
If divergences are determined herewith, which impair safety, then the fitting may not be carried out.
3. Reading and passing on the instructions
The safety and fitting instructions as well as
the operating guides are to be read and
observed!
The markilux operating guide, as well as the
setting instructions of the motor, switch and
controller manufacturers are to be handed
over to the user with a written confirmation
and fitted wind class (see handover
declaration) He is to be comprehensively
enlightened about the safety and usage
information of the awning. With non-
observance and maloperation, the awning
can suffer damage and accidents can occur.

Related product manuals