14
1. Attention: If water pockets form on the
side areas of the cover, the water cannot
drain. To prevent the formation of water
pockets, the coupling guide track must be
readjusted.
2. Remove the cover plugs below the
coupling guide track profile. Using the
adjusting screws (SW5) lower / raise the
coupling guide track.
3. Select the adjustment of the coupling
guide track in such a way that the water can
drain through the holes in the cover.
Readjustment of the coupling guide track in the case of formation of water pockets
markilux markant
markilux.com
Operation manual
To Next Page
Loading...
