EasyManua.ls Logo

Markilux Markant - Replacement of Faulty Illuminants; General Replacement Guidelines; Spare Parts for LED Spots; Replacing LED Spotlights

Markilux Markant
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
5 Replacement of a faulty illuminant for lighting
5.1 Overview spare parts lighting LED-Spots
These instructions for the replacement of defective illuminants at your markilux markant is to be read and observed.
Exclusively LED lights, which have a very long service life are used for the lighting of your markilux markant.
If the Ambient lighting and LED line is defective, kindly contact your specialist dealer.
If an LED spotlight is defective you can change it yourself.
Regularly check the awning for signs of wear and damage to cables and lamps. If damages occur, an authorised markilux specialist
dealer is to be entrusted with the adjustment.
Awnings which need to be fixed must not be used. Only spare parts released by markilux may be used.
Electrical installation or repairs must be carried out according to the installation specifications
DIN VDE 0100 by a qualified electrician only.
The lighting system must be disconnected from the electricity supply during work on the system (unplug, switch o fuse). Switch on
the lighting only when all cable connections have been established completely.
The following replacement parts are available via your markilux specialist dealer:
chapter Lighting type Article no.
5.2 1 piece LED Spot with plug in front profile 714881
5.2 LED spotlights in the front gutter or coupling profile
1 2 3
4
714881
1
2 3
1. Loosen the hexagon nut (2) with a SW 13
spanner. Subsequently, turn the defective
LED spotlight (1) anti-clockwise by 90° to
bring the clamp plate (3) in running direction
of the groove and remove.
2. Disconnect the plug (4) of the defective
spot light from the mains and plug in the
new spot light.
Article no. new LED spotlight with plug:
714881
3. Place the new LED spotlight (1) into the
track, turn clockwise by 90° to hook the
clamp plate (3) in the groove. Subsequently
retighten the hexagon nut (2).
5.3 LED line
Repair and maintenance jobs such as the replacement of spare parts, a damaged outer flexible line or other electrical components, must
be carried out exclusively by your markilux specialist dealer.
markilux markant
markilux.com
Operation manual

Other manuals for Markilux Markant

Related product manuals