marklin 24771 User Manual

8
Safety Notes
• Thislocomotiveistobeusedwiththeoperatingsystem
designed for it.
• Useonlyswitchedmodepowersupplyunitsandtransfor-
mers that are designed for your local power system.
• Thislocomotivemustneverbesuppliedwithpowerfrom
more than one power pack.
• Paycloseattentiontothesafetynotesintheinstructions
for your operating system.
• Notforchildrenundertheageof15.
• WARNING! Sharp edges and points required for operation.
Important Notes
• Theoperatinginstructionsareacomponentpartofthe
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• PleaseseeyourauthorizedLGBdealerforrepairsor
spare parts.
• http://www.maerklin.com/en/imprint.html
Functions
• ThismodelisdesignedforoperationonLGBtwo-railDC
systems with conventional LGB DC train controllers or
power packs (DC, 0 - 24 volts).
• Usealocomotivecontrollerwithmorethan1ampoftrain
current for this model.
Mode of Operation Switch
This model has a three-way power control switch mounted
insidethecab(Fig.1&2).
Pos. 0 All power off
Pos. 1 Power to motor, lights and smoke generator
Pos. 2 same as Position 1
Smoke Generator
This model is equipped with a smoke generator. A small
supply of LGB Smoke and Cleaning Fluid is included with this
model. For best operation, fill the generator halfway with
fluid. If the generator is overfilled, it will not convert the fluid
into smoke.
Attention! Never touch the heating element in the center of
the smoke generator. It is hot and fragile.
Multi-Train System
The model is equipped with a factory-installed onboard de-
coder for the LGB Multi-Train System. It can be used without
modifications on analog or digital layouts. For operation
with the Multi-Train System, the model is programmed to
loco address 03. For information on programming the loco
address, see the instructions for various MTS components.
When operating with the Multi-Train System, you can remo-
tely control the loco’s functions. Press the lighting button
(“9” with remotes) to turn the loco lights on or off.
When operating with the Multi-Train System, the loco fea-
tures a “Back-EMF” function. This keeps the motor speed
constant (and under normal conditions the loco speed),
even when the load of the loco changes, for example, in
curves or on grades.

marklin 24771 Specifications

General

Brand	marklin
Model	24771
Category	Toy
Language	English