marklin 24771 - Service and Maintenance; Lubrication; Replacing the Light Bulbs; Replacing the Smoke Generator

9
SERVICE
Lubrication
The axle bearings and the side rod ends should be lubrica-
ted occasionally with a small amount of Märklin-Öl (7149).
Replacing the light bulbs
Front light: Carefully pry the lens away from the lantern.
Usingtweezers,removeandreplacethebulb.Reassemble.
Cab light:Usingtweezers,removeandreplacethebulb.
Replacing the smoke generator (Fig. 3 & 4)
– Pull the safety cover out of the smoke stack (Fig. 3).
– Usepliersortweezerstopulltheoldsmokegeneratorout
of the stack (Fig. 4).
– Cut the wires to the old generator and attach them to the
replacement generator.
– Insulate the connections and push the replacement
generator into the stack.
– Reassemble.
Controllable Functions
Lighting
Smokegeneratoron/off 1