EasyManuals Logo

marklin 67025 User Manual

marklin 67025
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
which is connected to the running rails - see
Figure .
You can use any piece of C Track as the feeder
track.
Plug the power cord (1) for the transformer into the
wall outlet for your household current.
6. Operation
6.1 Delta Addresses
The 67025 Controler can distinguish among a total
of 4 addresses.
1 = Steam Locomotives
2 = Diesel Locomotives
3 = Powered Rail Cars
4 = Electric Locomotives
6.2 Locomotive Address
The locomotive addresses are set at the fac
-
tory. The addresses are given in the instructions
for each locomotive. These addresses are not
binding; they can be changed by following the
instructions for the locomotive. If you want to
control a locomotive with the controller in this
set, an address must be set for the locomotive,
which can be selected with the controller. These
addresses are:
Setting on the Address Selection
Switch
Locomotive
Address
1 78
2 72
3 60
4 24
6.3 Selecting a Locomotive
You look for the locomotive that you want to cont
-
rol on the address selector switch (6).
Steam locomotive
selected
Diesel locomotive
selected

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the marklin 67025 and is the answer not in the manual?

marklin 67025 Specifications

General IconGeneral
Brandmarklin
Model67025
CategoryController
LanguageEnglish

Related product manuals