Need help?Do you have a question about the marklin Oberleitung and is the answer not in the manual?
Securely attach the support base into the designated track cutouts for installation.
Modify and screw the support base into place for alternative mounting scenarios.
Utilize a shorter support pitch for catenary masts on straight track segments.
Employ a larger support pitch for catenary masts on curved track segments.
Adjust track distance based on pantograph clearance gauge requirements for safe operation.
Specifies the clearance gauge dimensions for straight track sections.
Specifies clearance gauge dimensions for curved tracks with a 1020 mm radius.
Use the two-piece contact line clip for straightforward and easy joint connections.
Utilize the three-piece contact line clip for secure connections at track branches.
Contact line section 5635 is designed specifically for straight track configurations.
Contact line section 5636 is versatile for both straight and curved track layouts.
Contact lines can be shortened and bent to precisely fit the track layout.
Ensure contact line is centered and bent to match the specific track layout.
Implement zigzag or bow string tensioning for contact lines, especially in curves.
Visual examples of track combinations showing appropriate contact line placement.
Illustrations of adapted track layouts with matching overhead line configurations.
Install the connection mast, which includes the essential power feeder component.
For Märklin Digital, remove the condenser from the 5633 feeder mast.
Securely attach the support base into the designated track cutouts for installation.
Modify and screw the support base into place for alternative mounting scenarios.
Utilize a shorter support pitch for catenary masts on straight track segments.
Employ a larger support pitch for catenary masts on curved track segments.
Adjust track distance based on pantograph clearance gauge requirements for safe operation.
Specifies the clearance gauge dimensions for straight track sections.
Specifies clearance gauge dimensions for curved tracks with a 1020 mm radius.
Use the two-piece contact line clip for straightforward and easy joint connections.
Utilize the three-piece contact line clip for secure connections at track branches.
Contact line section 5635 is designed specifically for straight track configurations.
Contact line section 5636 is versatile for both straight and curved track layouts.
Contact lines can be shortened and bent to precisely fit the track layout.
Ensure contact line is centered and bent to match the specific track layout.
Implement zigzag or bow string tensioning for contact lines, especially in curves.
Visual examples of track combinations showing appropriate contact line placement.
Illustrations of adapted track layouts with matching overhead line configurations.
Install the connection mast, which includes the essential power feeder component.
For Märklin Digital, remove the condenser from the 5633 feeder mast.
To Next Page
General
