marklin V 200 - Model Maintenance and Service; Lubrication Procedure; Replacing Interior Lighting Bulb; Traction Tire Replacement Guide

7
SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a
small amount of Märklin-Öl (7149).
Replacing the interior lighting (Fig. 1)
– Manually remove roof segment of cab.
– Using tweezers, remove the bulb.
– Plug in new bulb.
– Insert roof segment.
Replacing the traction tire
– Use a small, straight-blade screwdriver to replace the
tractiontire:
– Pry the old traction tire out of the wheel groove.
– Gently insert the new traction tire into the wheel groove.
– Make sure that the traction tire is seated properly in the
wheel groove.