◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
2、 Use unique anti-collision algorithm，has the super multi-tag identify ability；
3、 Have tag identify function and data area read, write, lock and kill these
functions. And supply the suit API to customer to do secondary
development.；
4、 Multi-tag identify ability：The MAX reader range can reach 8 meters.
（working with 7dBi gain antennas）， can connect the different gain
antennas like 9dBi、12dBi etc，can identify the tag which moving speed is
120km/h correctly.；
5、 Tag identify speed ： Single tag 2000 times/minute ， multi-tag
200pcs/second；
6、 Can connect to 1 to 4 same gain and different gain planar antennas via
high-frequency cable. To expand the identify area of tag and reduce the
hardware cost for customer. The RF power of the antennas can set from 0
to 31dBm in separate；
7、 Reader will detect antennas when it get power. In case to protect antenna
port. The one has no antenna connect will not send RF power.；
8、 Have RS232、RS485、 Weigand、TCP/IP、Relay etc output interface；
9、 Compatible with tag match function，Reader can identify the tag which
match the condition or not identify these condition tags by setting the
match conditions.；
10、Compatible with data cache function, Using FRAM (ferroelectric memory)
which can save data when power down，memory capacity is 32KBytes，
Can save 2200 pcs tag data in 12 Bytes data length.
2.3 Reader applications
This reader can used in items identification and data collecting project. As the
best performance of this reader, the reader are widely use in various RFID
system，reference application as below：
To Next Page
Loading...