Marktrace MR6100 Series - DEMO Configuration; Reader Connecting; Antenna and Power Setting

◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
18
ASCII Code Format
Hex Format
All above configuration will be valid only after click left bottom
button“set” button
5.2 Demo software Configuration
5.2.1 Reader connection
Click MR6100Demo.exe software, input reader‟s IP into the IP input box
(Default IP: 192.168.1.200, Port: 100 which is fixed), then click „connect‟ ICON,
software information display box will display the reader‟s parameter on the
success connection. Below image demonstrate the success connection.
5.2.2 Antenna & RF Power setting
1 On MR6100Demo.exe software‟s Setting interface, query and set Antenna‟s