◢MR6100 Serial UHF reader user manual（Ver 1.0）◣
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C. Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com
930MHz，stepped frequency is 250KHz；
3、 Trigger working mode：Timer and I/O can trigger reader，Timer interval
from 10-990ms；I/O trigger MAX time is 255s；
4、 Data pre-processing：On trigger working mode，Tag data can store in
cache or output directly.；
5、 Data cache：Trigger working mode data cache using FRAM (ferroelectric
memory) which can save data when power down，memory capacity is
32KBytes，Can save 2200 pcs tag data in 12 Bytes data length；
6、 Data output：Data return by instant messaging，Can config RS232、RS485、
Weigand、TCP/IP、Relay interface, Can config output data length and start
address，Output data format in ASCII；
7、 Compatible ISO18000-6C tag match function ， match tag by setting
conditions；
8、For ISO18000-6B tag. Can do read, write, lock and identify operate to single
tag one byte ，can read and write specific tag data with UID；
9、Working voltage：DC+9V～+15V；
10、Working temperature：-20℃～+60℃；
11、Storage temperature：-40℃～+85℃；
To Next Page
Loading...