Marley D - User Manual

Model D
Electric / Hydronic
Baseboard Heaters
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAU-
TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO
PERSONS, INCLUDING THE FOLLOWING:
1. Read all instructions before installing or using the heater.
2. A heater has hot and arcing or sparking parts inside. Do not
use in areas where gasoline or flammable liquids are used
or stored.
3. This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, and cur-
tains away from heater.
4. To prevent a possible fire, do not block air intakes or
exhaust in any manner.
5. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock or
fire, or damage the heater.
6. Serious injury or death could result from electric shock.
Make sure electrical power supply circuit coming to heater
is disconnected at main disconnect or service panel before
installing or servicing this heater.
SAVE THESE INSTRUCTIONS
!
Installation, Operation & Maintenance Instructions
WARNING
FILE #E37116
IMPORTANT INSTRUCTIONS
GENERAL
This heater is designed to provide years of efficient, trouble free operation as a primary or supplementary heat source for comfort
heating in residential and commercial applications. Baseboard heaters must be thermostatically controlled for efficient, safe opera-
tion. A thermostat is not provided with this heater. However, a single or double pole thermostat accessory is available for installa-
tion into this heater at your place of purchase, or the heater may be connected to any suitable wall mounted thermostat that will
meet the electrical load requirements. Installation or use of this product in any manner not described herein will void the warranty
and could result in injury, damage to property, or permanent damage to heater.

Summary

Important Instructions

General Heater Information

Heater description, application, and conditions that void the warranty.

Electrical Appliance Safety Warnings

Basic precautions to prevent fire, electric shock, and injury when using appliances.

Installation Instructions

Installation Safety Warnings

Critical safety warnings about electrical shock, fire, and injury during installation.

Clearance Requirements

Minimum distance requirements for heaters near floors, drapes, and furniture.

Single Unit Installation Steps

Step-by-step guide for installing one baseboard heater unit.

Mounting and Wiring Procedures

Steps for positioning, drilling, removing covers, and routing power supply.

Wiring Diagrams and Compartment Data

Illustrates electrical connections and provides junction box volume data.

Operating Instructions

Thermostat Placement and Type

Advises on thermostat placement and type for optimal comfort.

Initial System Start-up

Procedure for powering up the system and checking heater operation.

Over-Temperature Safety Devices

Explanation of internal safety limits and their function.

Maintenance Instructions

Heater Cleaning Procedures

Guidelines for cleaning the heater cabinet and internal components.

Repainting Heater Enclosure

Guidance and cautions regarding repainting the heater exterior.

Limited Warranty Information

Warranty Coverage Details

Details the duration and conditions of the product warranty.

Obtaining Service and Parts

Information on how to get warranty service and contact Marley.

Marley D Specifications

General

Brand	Marley
Model	D
Category	Heater
Language	English