Marley S Series - User Manual

S Series
Electric Toe Space Heaters
Without Built-in Thermostat
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered
Products. You have made a wise investment selecting the highest quality product in the heating indus-
try. Please carefully read the installation and maintenance instructions shown in this manual. You
should enjoy years of efficient heating comfort with this product from Marley Engineered Products... the
industry’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
Read Carefully - These instructions are written to help
you prevent difficulties that might arise during installation
of heaters. Studying the instructions first may save you
considerable time and money later. Observe the following
procedures, and cut your installation time to a minimum.
To reduce risk of fire or electric shock:
1. To prevent electrical shock, disconnect all power coming to
heater at main service panel before wiring or servicing.
2. All wiring must be in accordance with the National and Local
Electrical Codes and the heater must be grounded as a pre-
caution against possible electric shock.
3. Verify the power supply voltage coming to heater matches the
ratings printed on the heater nameplate before energizing.
4. This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces.
5. DO NOT INSTALL THIS HEATER UNDER CABINETS
MADE OF VINYL OR COATED WITH VINYL.
6. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock,
fire,or damage to the heater.
7. To prevent a possible fire, do not block air intakes or exhaust
in any manner. Keep combustible materials, such as crates,
drapes, etc., away from heater. Do not install behind
doors, furniture, towels, or boxes.
8. A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint or flammable liquids are
used or stored.
9. Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
10. This heater is not approved for use in corrosive atmospheres
such as marine, green house or chemical storage areas.
Installation & Maintenance Instructions
WARNING
1
FILE #E21609
!
SAVE THESE INSTRUCTIONS

Summary

Installation & Maintenance Instructions

Safety Warnings

Critical safety precautions to prevent fire and electric shock during installation and use.

Horizontal Installation

Wiring for Built-in Thermostat

Connect field wiring to heater leads for models with built-in thermostats as per diagram.

Wiring for Remote Thermostat

Connect field wiring to heater leads for models with remote thermostats as per diagram.

Specifications

Changing Wattage Output

Instructions on how to modify the heater's wattage by removing a red jumper.

Maintenance

Cleaning the Heater

Detailed steps for cleaning the heater's internal components using a vacuum cleaner.

Operational Notices and Cautions

Information on the automatic reset limit and indicator light function and cautions.

Limited Warranty

Obtaining Service and Parts

Guide on how to get warranty service, replacement parts, and general product information.

Installation & Maintenance Instructions (S1500 TB;S1504 TB Built-in Thermostat)

Safety Precautions

Essential safety guidelines to prevent fire, electric shock, and injury during operation.

Horizontal Installation (S1500 TB;S1504 TB)

Wiring Connections

Detailed instructions for connecting field wiring to heater leads for both built-in and remote thermostats.

Wiring Diagrams and Operation

Remote Thermostat Wiring

Electrical diagram and notes for wiring the heater with a remote thermostat.

Heater Cleaning Procedure

Step-by-step guide for cleaning the heater's internal components.

Operational Notices and Cautions

Information on the automatic reset limit and indicator light function and cautions.

Thermostat Accessory Installation

Accessory Specifications

Technical specifications for the single pole thermostat accessory, including electrical ratings.

Safety Warnings for Accessory Installation

Critical safety warnings regarding fire and electric shock hazards during thermostat accessory installation.

Thermostat Accessory Installation Steps

Step-by-step guide for installing the single pole thermostat accessory onto the heater.

Operation Check and Important Information

Operation Check Procedure

Guide to verify the correct operation of the heater after installation, including fan delay check.

QTS Test Procedure

Marley S Series Specifications

General

Brand	Marley
Model	S Series
Category	Heater
Language	English