36
additional information
Increased load requirements MD towers are designed so that cells of
either equal or unequal capacity can be added in the future. This allows you to
compensate for the load increases that normally occur with the replacement
or addition of production equipment—and still retain continuity with respect
to your cooling tower system.
Tower rebuilding SPX Cooling Technologies routinely rebuilds and upgrades
cooling towers of all materials and manufacture. If your tower ever reaches the
limit of its service life, we recommend that you investigate the cost of rebuild-
ing before you routinely order a new replacement tower.
Each MD tower includes a document package containing general
orientation drawings, “MD Field Installation Manual” Assembly Instructions,
and tower component manuals. These documents contain important
information relating to safe installation and operation of the cooling
tower. Field installation is always required for fan guards, piping inlets and
piping outlets. Some optional accessories, such as valves, handrails, ladders
and safety cages may also require field installation. If installation details are
not covered in the “MD Field Installation Manual” a separate installation
drawing or manual for each purchased option is included in the document
package along with bills of material. If you have purchased an option and
can’t find the appropriate installation drawing, contact your local Marley sales
representative before proceeding.
In addition to these specific documents, SPX publishes numerous technical
reports including more detailed information on a variety of cooling tower op-
eration and service topics. Your Marley sales representative will be happy to
give you copies of these reports at no charge.
For complete parts and service assistance, contact the Marley sales repre-
sentative in your area. If you need help locating the office nearest you, please
phone 913 664 7400 or check the internet at spxcooling.com.
To Next Page
Loading...
