Marquant 012808 - User Manual

20 pages

Go to English

Save Page as PDF

To Next Page

012808

Instrukcja obsługi

(Tłumaczenie oryginalnej instrukcji)

Ważne! Przed użyciem uważnie przeczytaj instrukcję obsługi!

Zachowaj ją naprzyszłość.

WAGA ŁAZIENKOWA Z FUNKCJĄ BLUETOOTH

Bruksanvisning i original

Viktigt! Läs bruksanvisningen noggrant innan användning!

Spara den för framtida behov.

PERSONVÅG MED BLUETOOTH

BATHROOM SCALES WITH BLUETOOTH

Operating instructions

(Translation of the original instructions)

Important! Read the user instructions carefully before use.

Save them for future reference.

PERSONVEKT MED BLUETOOTH

Bruksanvisning

(Oversettelse av original bruksanvisning)

Viktig! Les bruksanvisningen nøye før bruk.

Ta vare på den for fremtidig bruk.

Main Page

Questions and Answers

R
Robert RandallAug 4, 2025
What to do if the Marquant Scales app doesn't receive the weighing result?
- M
  Melanie DanielAug 4, 2025
  If the Marquant Scales app isn't receiving weighing results, here are a few things to try: * First, ensure the connection icon in the app indicates that your smartphone is connected to the scales. * Next, verify that Bluetooth is enabled on your smartphone and that the scales and smartphone are within the appropriate range. * Also, check the batteries in the scales and replace them if needed. * You might also want to try restarting the app. * Finally, try disabling and then re-enabling Bluetooth, and then repeat the connection procedure between the scales and your smartphone.
C
Crystal HallAug 18, 2025
What to do if nothing is shown on the display of my Marquant 012808 Scales?
- A
  Amy CisnerosAug 18, 2025
  If nothing is showing on the display of your Marquant Scales, try these steps: 1. Check the batteries and replace them if necessary. 2. Note that repairs should only be carried out by qualified personnel or an authorized service center.

Summary

Safety Instructions

Technical Data

Description

Assembly

Inserting the Batteries

Open the battery compartment on the back and insert the batteries with the correct polarity. If batteries are already inserted, pull out the insulation strip.