Why won't the filterpack door close on my Mars FLAVIA Barista Coffee Maker?
If the filterpack door on your Mars Coffee Maker will not close, it may be due to improper reassembly or insertion of an espresso pack. Remove and replace the filterpack door, and ensure you're not inserting espresso packs (red nozzle) into the filterpack door, as they can only be used in the espresso pack door.
Why won't the espresso pack door close on my Mars Coffee Maker?
If the espresso pack door on your Mars Coffee Maker will not close, it's likely because a filterpack was inserted. Do not insert filterpacks (clear colored nozzles) in the espresso pack door; they are only for the filterpack door.
Why are there no messages on the display of my Mars Coffee Maker?
If there are no messages on the display of your Mars Coffee Maker, ensure the brewer is switched on at the back. Also, check if it's disconnected at the socket and plug it back in. If it's in “deep standby” mode, press any button to exit. If the issue continues, further assistance is needed.
General| Model | FLAVIA Barista |
|---|---|
| Voltage | 120V |
| Water Reservoir Capacity | 1.5 liters |
| Coffee Pod Compatibility | FLAVIA single-serve pods |
| Material | Plastic |
| Color | Black |
| Beverage Options | Coffee, Espresso |
| Brewing Capacity | Single serve |
Safety instructions for general use of the appliance.
Requirements for connecting to the mains water supply.
Compliance with European legislation for safety and EMC.
Details on brewer dimensions, weight, and space requirements.
Requirements for electrical connection and supply.
Specific electrical requirements for the UK market.
Recommended annual electrical safety tests and checks.
Diagram and labels of the brewer's external components.
Explains how to use different filter packs in the correct brewer slots.
Instructions for powering on the FLAVIA barista.
Steps to access and navigate the operator menu.
How to choose between jug-filled or plumbed-in water supply.
Specific instructions for mains water connection.
Steps for manually filling the brewer with water.
Explains the necessity and process of priming the hot water system.
Detailed steps for priming the brewer's hot water tanks.
Instructions for priming the espresso system.
How to accommodate larger mugs by removing drip trays.
Guidance on using espresso cups and the cup stand.
Step-by-step instructions for brewing an espresso.
Explanation of how cappuccinos, lattes, and mochas are made using two packs.
Lists drink combinations using Espresso or Filter Coffee as the second pack.
Instructions for preparing these drinks using espresso.
Instructions for preparing these drinks using filter coffee.
Steps to empty and clean the drip trays.
Instructions for emptying and cleaning the pack bins.
General cleaning instructions for the brewer's exterior.
Steps to clean the water filler funnel assembly.
Instructions for cleaning the filterpack door.
Cleaning instructions for cup sensors and air ducts.
Instructions for cleaning the espresso door.
Guidance on sanitising surfaces after cleaning.
How to access and view various audit data from the brewer.
Instructions for setting or changing the operator password.
Steps to set up the brewer's energy saving standby mode.
Instructions for draining the brewer, recommended before moving.
To Next Page
