06
ECO
Press this button to enter the
energy efficient mode.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
TIMER
CLEAN
LED
Turbo
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT FAN
SWING
TEMP
Used to confirm the selected
functions
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Set timer to turn unit on or off
NOTE: HEAT mode is not supported
by the cooling only appliance.
Scrolls through operation
functions as follows:
Fresh( ) Sleep( )
Follow Me( )
AP mode( ) Fresh...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Used to start/stop the Self
Clean function.
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
FAN SPEED
TEMP
Enables unit to reach preset
temperature in shortest possible
time.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
NOTE: Holding this button
down for 2 seconds will
activate Silence feature.
SHORTCUT
Used to restore the current
settings or resume previous
settings.
Model:
NOTE: For models of RG10A4(D1)/BGEFU1, RG10A5(D1)/BGEFU1 and RG10A5(D1)/BGCEFU1,
press together & buttons at the same time for 3 seconds will alternate the temperature
display between the °C & °F scale. Fresh feature is not available for models of
RG10A4(D)/BGEF and RG10A4(D1)/BGEFU1.
RG10A4(D)/BGEF, RG10A4(D1)/BGEFU1, RG10A5(D)/BGEF, RG10A5(D1)/BGEFU1
RG10A5(D)/BGCEF & RG10A5(D1)/BGCEFU1(Cooling only models,
AUTO mode and HEAT mode are not available),
RG10A11(D)/BGEF(20-28 C).
O
Increases temperature
O O
in 1 C(1 F) increments.
Max. temperature is
O O
30 C(86 F).
Decreases temperature
O O
in 1 C(1 F) increments.
Min. temperature is
O O
17 C(62 F).
To Next Page
Loading...
Need help?
General
