Parts List
40
25004/98337 Rev C
The following pages show the Hand Stencil Machine and the corresponding numbers for
repair parts. Please order your replacement parts by requesting the part number shown.
Please also note the quantity provided in each package and the specific part number
necessary for your machine.
Stencil Machine
Assembly,
see page 33
Description Part Number Quantity per kit
1. Screw, phillips truss head RP32A 5
2. Dial blank, manual RP32 1
3. Holder, dial RP08 1
4. Screw, set square head RP08B 5
5. Washer RP1503C 5
6. Screw,cap head hex RP04A 5
7. Wheel assy, hand RP07X 1
8. Hood (1/4", 1/2", 3/4") RP02-SHQ 1
Hood (1") RP02-R 1
9. Carrier, punch (1/4", 1/2", 3/4") RP04-SHQ 1
10. Base, with shaft and plate 1/2" RP01X-H 1
Base, with shaft and plate 3/4" RP01X-S 1
Base, with center shaft 1" RP01X-R 1
11. Cap, hex head (1/4", 1/2", 3/4") RP01A-SHQ 5
Cap, hex head (1") RP01A-R 5
Front Assembly,
see page 35
Description Part Number Quantity per kit
1. Hood (1/4", 1/2", 3/4") RP02-SHQ 1
Hood (1") RP02-R 1
2. Nut, hex RP22A 5
3. Washer, lock internal tooth RP22B 5
4. Stud, spring RP37 1
5. Washer RP35SW 5
6. Spring, centering arm RP30S 2
7. Screw, set square head RP47 5
8. Pin, release button RP18B 1
9. Arm liner, assy centering RP35A 1
10. O-ring RP35B 5
11. Arm assy, centering (1/4", 1/2", 3/4") RP30X-SHQ 1
Arm assy, centering (1") RP30X-R 1
12. Washer RP35W 5
13. Screw, cap hex head RP09A 5
14. Spring, handle RP37S 1
15. Rocker assy, centering RP28 1
16. Plunger assy RP31 1
To Next Page
Loading...
