Marsh R - Introduction

The Hand Stencil
Machine Owner’s
Manual
This Marsh Hand Stencil Machine Owner’s Manual provides operation and maintenance
instructions for all R, H, Q, and S models. These models include the R, R-5, R-5-SPAN-N,
R-RUSSIAN, R-SPAN-N, H, H-POLY, H-RUSSIAN, H-SPAN-N, Q, Q-POLY, Q-SPAN-N, S, S-
5, S-5-SPAN-N, S-RUSSIAN and S-SPAN-N. Marsh manufactures stencil machines that cut
1/4" (6.35 mm), 1/2" (12.7 mm), 3/4" (19.05 mm) and 1" (25.4 mm) characters. Your
stencil machine will cut neat, precisely spaced characters in oilboard, which may then be
inked with Marsh Fountain Rollers, Fountain Brushes, Spray Inks, K Stencil Inks, Rolmark
and Poly Rolmark inks. Inked stencil boards can be used to mark on plastic, fiber
cartons, or metal and wood containers. To order replacement parts, please refer to the
Parts List section in this manual.
For more assistance, or if you would like to obtain information about any Marsh product,
please contact your Marsh distributor or Marsh Company at:
707 East B Street Telephone: (618) 234-1122
Belleville, Illinois (800) 851-3441
62222 U.S.A. Fax: (618) 234-1529
Introduction
3
25004/98337 Rev C