Marshall Amplification ACTON II Bluetooth - Marshall Acton II AUX Input Connection; Wired Audio Connection Guide

012.
CONNECTING VIA AUX INPUT
001. CONNECT A 3.5 mm STEREO JACK TO THE INPUT LABELLED AUX ON THE TOP
OF THE SPEAKER.
002. CONNECT THE OTHER END OF THE LEAD TO THE AUDIO OUTPUT ON YOUR AUDIO
SOURCE.
003. SELECT AUX AS THE INPUT. PUSHING THE
SOURCE BUTTON TOGGLES THE
INPUT SOURCES.
NOTE: AUDIO LEADS ARE
NOT INCLUDED IN THE
ACTON II.
001. 002.
003.