TROUBLESHOOTING
PROBLEM CAUSE ACTION
THE ACTON II
DOES NOT TURN
ON
The speaker is not connected
to a mains electricity supply.
Connect the mains lead to the
Acton II and a working wall
socket.
Pull and hold the power lever
towards the front of the
speaker until the indicators
light up.
THERE IS NO
AUDIO OR AUDIO
IS TOO LOW
The wrong audio source is
selected.
Ensure that the device is
connected to the Acton II.
Volume is set too low on
either the audio source or the
speaker.
Slightly increase the volume
on your audio source or the
speaker.
CANNOT CONNECT
OR PAIR WITH A
Bluetooth
DEVICE
Bluetooth is not enabled on
your device (smartphone,
tablet, computer).
Activate Bluetooth on your
device.
There are already two devices
connected to the speaker.
Disconnect one of the
connected Bluetooth devices
before connecting to the
speaker.
The speaker is not in pairing
mode.
Push and hold the Bluetooth
button for 3 seconds to make
the speaker discoverable by the
device.
018.
To Next Page
Loading...
Need help?
General
