TROUBLESHOOTING
019.
PROBLEM CAUSE ACTION
THE SPEAKER IS
NOT RESPONDING
A software problem has
occurred.
Unplug the speaker mains plug
from the wall socket, wait for
15 seconds, then plug it in
again.
Bluetooth
CONNECTION
DROPS OUT
The two Bluetooth devices are
too far apart or the connection
is affected due to obstacles.
Move the devices closer so that
they are within 10 metres, and
unobstructed by obstacles such
as walls or doors.
There is a strong electric field
surrounding the Acton II.
Items such as microwave
ovens, wireless network
adapters, fluorescent lights
and gas cookers use the
same frequency range as the
Bluetooth device. This may lead
to electrical disturbances.
THERE IS A
CRACKLING
SOUND
The amplifier is clipping as it
has run out of output power.
Decrease the volume on your
audio source.
Lower the volume or bass on
the Acton II.
To Next Page
Loading...
Need help?
General
