Marshall Amplification Bluesbreaker - Understanding Bluesbreaker Controls; Gain Control; Tone Control; Volume Control

ENGLISH
7
CONTROLS
The pedal is acve when the LED above the footswitch is illuminated. Press the
footswitch again to deacvate the pedal.
Gain: Sets the pre-distoron level.
Tone: Use this control to sculpt your sound, such as boosng the low-end or
accentuang the high frequencies.
Volume: Controls the output level of the pedal (post-distoron).
WARRANTY
For warranty informaon and to register your product please visit:
marshall.com/register-your-marshallamp