Marshall Amplification GUV'NOR - User Manual

THE GUV’NOR
RE-ISSUE PEDAL

Summary

Getting Started

Powering the Pedal

Instructions for fitting a 9V battery or connecting a 9V DC power adaptor, with a warning about incompatible adaptors.

Specifications

Controls

Footswitch and LED Status

Indicates pedal status via LED and how to activate/deactivate using the footswitch.

Gain Control

Adjusts the pre-distortion level of the pedal.

EQ Controls (Bass, Middle, Treble)

Adjusts low-end, mid, and high-end frequencies for tone shaping.

Level Control

Sets the overall output volume of the pedal after distortion.

Effects Loop

Enables adding effects after EQ using a Y-insert cable.

Warranty Information

Marshall Amplification GUV'NOR Specifications