Marshall Amplification GUV'NOR - Controls; Footswitch and LED Status; Gain Control; EQ Controls (Bass, Middle, Treble)

ENGLISH
7
CONTROLS
The pedal is acve when the LED above the footswitch is illuminated. Press the
footswitch again to deacvate the pedal.
Gain: Sets the pre-distoron level.
Bass: Use this control to dial in a low-end boost.
Middle: Use this control to boost or scoop the mid frequencies.
Treble: Use this control to dial in a high-end boost.
Level: Controls the output level of the pedal (post-distoron).
Loop: The eects loop allows you to add addional eects post EQ. To use
this a Y-insert cable is required.
WARRANTY
For warranty informaon and to register your product please visit:
marshall.com/register-your-marshallpedal