Marshall Amplification GUV'NOR - Getting Started; Powering the Pedal

ENGLISH
5
GETTING STARTED
This device requires power from either a 9V baery or a 9V DC power adaptor:
• To t a baery, remove the compartment cover on the underside of
the pedal. Insert the baery, connect it to the terminals and replace the
compartment cover. Remove the baery from the pedal when not in use.
• When selecng a power adaptor for your pedal, ensure it is compable
with both the pedal and your mains supply. Your Marshall dealer can help
you with this.
Warning: unsuitable power adaptors may produce unwanted noise or damage
your pedal.
INSERT PHOTO(S) OF MANUFACTURING HERE