ENGLISH
GUITAR TUNER
Pressing the PRE FX and AMP Section Switches (#15 & #16 in this manual) together
accesses the guitar TUNER:
• Pluck a string and the note you are playing will display.
• Tune the string until the name of the note you wish to tune to appears on the screen.
• The bar will move to the left if the note is at. The bar will move to the right if the note is
sharp.
• When the bar is dead centre, that string is tuned to the displayed note.
• Press EXIT/STORE to exit the Tuner.
FACTORY RESET
Performing a factory reset will return CODE’s Presets back to when it was new.
To perform a factory reset:
• Power OFF the amplier using the ON/OFF switch (#14 in this manual).
• Whilst holding down the AMP Section Switch, turn the power ON.
• The screen will display a notication that the amplier is about to be returned to its
factory settings.
• If you are sure that you want to perform a factory reset, press and hold the EXIT/STORE
switch to conrm (#22 in this manual).
• If you do not want to restore the factory presets, pressing any other switch will cancel the
factory reset operation and boot the amplier as normal.
Before performing a factory reset, be sure that you want to overwrite all of your personal
Presets.
!
ENGLISH
BLUETOOTH
Pressing REV and POWER Section Switches together (#19 & #20 in this manual) accesses
the Bluetooth
®
pairing function:
• The display screen will show ‘Bluetooth:’ with your CODE amplier’s
pairing ID.
• The blue LED on EXIT/STORE (#22 in this manual) will ash while pairing.
• When paired, the blue LED will stop ashing and remain lit.
• When streaming audio, use the MASTER volume control or your music player to set the
volume level.
The Marshall Gateway™ App enables you to control your CODE amplier remotely using
your iOS or Android device. Create a Marshall Cloud prole and sync your device to
manage your Preset library online. You can share your Presets, access featured Presets,
join the conversaion on the CODE Forum and more. Register and become part of the
CODE online community at: my.marshall.com. Download Marshall Gateway now from the
App Store or Google Play.
Streamed audio will bypass CODE’s panel features, with the exception of MASTER
volume.
!
STORING A PRESET (CONT.)
PRE FX
AMP
MOD
DEL
REV
POWER
CAB
Clear
Number
Upper / Lower Case A
Upper / Lower Case
Space
Backspace
Cancel
NAMING SHORTCUTS
• To complete the store process, press & hold EXIT/STORE once more until STORED
appears on the display screen. Your edited Preset has now been stored to CODE’s
memory.
The Section Switches act as naming shortcuts:
To Next Page
Loading...
Need help?
General
