Do you have a question about the Marshall Amplification CODE 25 and is the answer not in the manual?
Brand | Marshall Amplification |
---|---|
Model | CODE 25 |
Category | Amplifier |
Language | English |
Connect via USB for DAW, music library, firmware updates, and MIDI control.
Connect your guitar using a quality cable to prevent noise interference.
Controls the amount of gain introduced to a Preset for desired drive.
Adjusts the warmth and low-end depth of your sound.
Adjusts body by boosting or cutting midrange frequencies.
Makes sound brighter or softer, affecting tonal edge.
Controls the volume level within a selected Preset.
Combination of amp, FX, settings stored to a location for recall.
Controls the overall volume level of the CODE amplifier.
Affects dynamic range, compressing peaks above a threshold.
Simulates solid-state Distortion and Overdrive FX pedals.
Dynamic filter controlled by input level or LFO for wah effects.
Generates chromatic harmonies and fine-tunes pitches.
Models classic clean amp tones.
Models classic crunch amp tones.
Models classic overdrive amp tones.
For external FX, provides EQ and Gate access.
Suppresses unwanted noise by attenuating signal below threshold.
Applies subtle pitch variation for depth and width.
Creates vivid, complex sonic textures, like 'jet plane' FX.
Uses all-pass filters to create classic Phaser sound.
Modulates signal amplitude for varied sonic characteristics.
High fidelity delay line with up to 4 seconds delay for loops.
Recreates the sound of analogue delays.
Adds rhythmic repeat for more complex delay patterns.
Repeats run backwards, adds texture and eerie quality.
Set delay time by tapping to match music tempo.
Recreates acoustic reflections of small to larger rooms.
Recreates longer acoustic reflections of a hall-sized space.
Recreates acoustic reflections of a very large space.
Classic analogue way of creating Reverb FX using springs.
Class A/B 100 Watt with EL34 valves.
Class A/B 30 Watt with 5881 valves.
Class A 30 Watt with EL84 valves.
Class A/B 100 Watt with 6L6 valves.
Lists MST modelled speaker cabinets, recreations of classic Marshall cabs.
Save/exit settings and return to the main Preset screen.
Shows Preset name, number, parameter settings, and tuner display.
Accesses Bluetooth pairing for wireless control and audio streaming.