Marshall Amplification CV503 User Manual

CV503/CV506/CV344/CV346 Manual
www.marshall-usa.com13 14
• ON: Set the camera setting to either “FACTORY” or “USER” of “CHANGE” menu. Make sure
to select the right mode from “CHANGE” before defaulting the camera.
• RESET MODE: Select the desired setting mode.
Select from USER or FACTORY using the LEFT or RIGHT button.
1. USER: Select “USER” if setting value user saved last is needed.
2. FACTORY: Select “FACTORY” if factory default setting is needed.
“FRAME RATE”, “CAM ID”, and “BAUDRATE” will note change.
• RESET: Reset the camera settings the factory defaults or user setting value.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
RESET MODE
RESET
SAVE AS USER
RETURN
>
>
>
>
>
>
>
>
FACTORY
>
MENU RESET
11. RESET
Select RESET using the UP or DOWN buttons.
• SAVE: Exit the setup after saving the value changes.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
>
>
>
>
>
>
>
>
MENU
12. EXIT
Select EXIT using the UP or DOWN button.

Marshall Amplification CV503 Specifications

General

Brand	Marshall Amplification
Model	CV503
Category	IP Camera
Language	English