EasyManua.ls Logo

Marshall Amplification G80RCD MG Series User Manual

Marshall Amplification G80RCD MG Series
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Marshall Amplification plc
Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England
Tel : [01908] 375411 Fax : [01908] 376118
Web Site - http://www.marshallamps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and
development, Marshall Amplification plc reserve the right to alter specifications without prior notice.
Question and Answer IconNeed help?

Do you have a question about the Marshall Amplification G80RCD MG Series and is the answer not in the manual?

Marshall Amplification G80RCD MG Series Specifications

General IconGeneral
BrandMarshall Amplification
ModelG80RCD MG Series
CategoryMusical Instrument Amplifier
LanguageEnglish

Summary

Important Safety Instructions

General Safety Warnings

Crucial safety guidelines for amplifier operation, covering electrical hazards, maintenance, and environmental conditions.

G50RCD Front Panel Features

Channel 1 (Normal) Controls

Details input jack, gain, EQ, and channel select for the normal channel.

Input Jack

Connects the guitar to the amplifier using a high-quality screened cable.

Gain Control (Normal Channel)

Adjusts gain for clean to crunch sounds on the normal channel.

EQ Controls (Bass, Middle, Treble)

Interactive EQ bands for tonal shaping on the normal channel.

Channel Select Push Switch

Switches between normal and boost channels; essential for footswitch functionality.

G50RCD Front Panel Features - Channel 2 and Master Section

Channel 2 (Boost) Controls

Details gain, contour, EQ, and volume for the boost channel.

Gain Control (Boost Channel)

Adjusts gain for a wide variety of distortion sounds on the boost channel.

Contour Control

Mid-band contour shift for versatile tonal shaping on overdrive settings.

EQ Controls (Bass, Treble)

EQ controls for tailoring sound across lower to upper frequencies on the boost channel.

Volume Control (Boost Channel)

Controls the overall volume level of the boost channel.

Master Reverb Control

Adjusts the depth of the reverb effect across both channels.

Effects Loop Functionality

Connects external processors; advises on time-based effects through loop.

G50RCD Rear Panel Features

Mains Input

Connection point for the mains lead.

CD Input

Input for connecting CD/tape players for practice.

Related product manuals