Need help?Do you have a question about the Marshall Amplification MG50FX Gold and is the answer not in the manual?
General| Type | Solid State |
|---|---|
| Power Output | 50W |
| EQ | 3-band EQ |
| Footswitch Included | No |
| Speaker Size | 12" |
| Channels | 2 |
| Outputs | 1 x headphone output |
| Footswitch I/O | 1 x 1/4" |
| Footswitch | Optional |
| Effects | Reverb, Chorus, Phaser, Flanger, Delay |
| Inputs | 1 x instrument input, 1 x auxiliary input |
Critical safety warnings and precautions for amplifier operation.
Step-by-step instructions for initial amplifier setup and connection.
Information about the power switch and mains connection.
How to navigate between amplifier channels and modes.
Explanation of the differences between Preset and Manual modes.
Information on powering the amp and resetting to factory defaults.
Mains connector, fuse, and loudspeaker output socket.
How to select channels and operate in Preset/Manual modes.
Explanation of preset and manual mode functionalities.
How to access and use the built-in tuner.
To Next Page